FAQ's

100% Acrylic/Polymer (Water-based) Hybrid Resin (no additives or fillers) acrylic single component, closed-cell coating.

It will adhere to almost any surface, Steel, Aluminum, Galvanized, Glass, Concrete, Tile, Wood
Canvas, Fiberglass, Insulation/foam, Shingle, Rubber, Plastic (with a plastic adhesive).
The only material it will NOT adhere to is silicone/silicone-based material.

We can resist most types of chemicals on the Ph scale from 1-14.

It takes approximately one week for a full cure, 1-4 hours for a coat to dry, Global MAD needs 2-4 coat coverage for the desired performance.

Global MAD can be applied over existing coatings and will adhere very well.

It will last for over 5 years in the pail.

Global MAD Products can last between 5-7 years before recoating is needed for maximum protection. The waterproofing ability will last longer than 10 years, regular inspections are recommended.

The surface must be clean, dry and stable.

The coating is closed-cell which means it does not breathe or allow any air, liquid to penetrate and touch the surface which was coated, providing benefits that will prolong the lifespan of valuable assets

We generally cut the prep time compared to other coatings by more than half.

Global MAD must be applied between 55°F to 100 °F / 13°C to 37°C for optimum results. Even in a controlled environment, the dew point needs to be checked as well.

•  Heavy Coverage: Waterproofing, vapor barrier and heavy corrosion resistance 22 mils / 540 microns.
• General Coverage: Thermal and light corrosion resistance 11 mils / 270 microns.

• Marine
• Armor
• Defense
• Fiber
• Bond
• Cleaner

• Heavy Coverage: 50 sq.ft = 4.6 m2 per gallon (22 Mils) EU: 1 Liter = 1.21 m2 (540 microns)
•  General Coverage: 100 sq.ft = 9.2 m2 per gallon (11 Mils) EU: 1 Liter = 2.42 m2 (270 microns)

You can choose the color from our Exclusive Collection Colors or we can custom for you based on the Ral Scale System.

• Any surface above +200 F° / + 93°C
• Any surface below -100 F° / – 73°C
• Areas that will come into contact with cleaning thinners
• Silicon/silicon-based substrate
• On Plastic Substrates, Plastic adhesion bonding coating must be applied before Global MAD Products can topcoat over it.